*1 This setting is only available in US and Canada.*2 This setting may not be available depending on the country or region of purchase.Quality of Received Fax is PoorCause ActionECM RX is set toOFF.Set ECM RX to ON. See ECM RX.The sender's originaldocument or faxmachine is dirty.The image quality of the fax is mainly determinedby the sender's fax machine. Contact the senderand check whether the scanning area of his/herfax machine is not dirty.ECM sending/receiving is notenabled although theline/connection is poor.On the machine, set ECM RX to ON.See ECM RX.Contact the sender and check that his/hermachine is set to enable ECM sending.If the sender's or receiver's fax is not ECM-compatible, the fax will be sent/received in thestandard mode.Reduce the reception start speed. See RXSTART SPEED.Repeated Errors Occur When You Receive a FaxCause ActionThe telephone linecondition or theconnection is poor.Reduce the reception start speed. See RXSTART SPEED.If there is a poor line or connection, reducing thereception start speed may correct the error.The sender's faxmachine is notoperating normally.Contact the sender and check whether his/herfax machine is operating normally.200
