Error Message Appears on a PictBridge Compliant DeviceThe following are the possible errors that may occur when printing directly from a PictBridgecompliant device and the countermeasures to clear them.NoteThis section describes errors that are indicated on Canon-brand PictBridgecompliant devices.The error messages and operations may vary depending on the device you are using.For errors on non-Canon PictBridge compliant devices, check the error message onthe LCD and take the appropriate action to clear the error. For details, see An ErrorMessage Is Displayed on the LCD.For the errors indicated on the PictBridge compliant device and their solution, alsorefer to the instruction manual of the device. For other troubles on the device, contactthe manufacturer.Error MessageOn PictBridgeCompliantDeviceAction"Printer in use" If the machine is printing from the computer orwarming up, wait until the job ends. When it isready, the machine starts printing automatically.When printing first after changing the media type,the message asking you to confirm the positionof the paper thickness lever may appear on theLCD on the machine. If this message isdisplayed, make sure that the paper thicknesslever is set appropriate, then press the OKbutton on the machine."No paper" Load paper in the Rear Tray, and selectContinue* in the display on your PictBridgecompliant device.* To resume printing, you can also press the OKbutton on the machine instead of selectingContinue on the camera.194
