Print Results Not SatisfactoryIf the print result is not satisfactory, confirm the paper and print quality settings first.Do the page size and media type settings match the size and type of theloaded paper?When these settings are incorrect, you cannot obtain a proper print result. If you are printing aphotograph or an illustration, incorrect paper type setting may reduce the quality of printoutcolor. Also, if you print with an incorrect paper type setting, the printed surface may bescratched. In borderless printing, uneven coloring may occur depending on the combination ofthe paper type setting and the loaded paper.Did you set the print quality setting appropriately?Select a print quality option suitable to the paper and image for printing. If you notice blurs oruneven colors, increase the print quality setting and try printing again.* When printing from a PictBridge compliant device, set the print quality setting by using theOperation Panel on the machine. You cannot make this setting from a PictBridge compliantdevice.The method to confirm the paper and print quality settings differs depending on what you do with yourmachine.To copy by operating the machine Confirm by using the Operation Panel on themachine. See the pages where each printingmode is explained in this manual.To print from a PictBridge compliantdeviceConfirm by using your PictBridge compliantdevice or the Operation Panel on the machine.Refer to "Printing Photographs Directly from aCompliant Device" in the Quick Start Guide.To print from a computer Confirm by using the printer driver.Refer to the PC Printing Guide on-screenmanual.If the problem is not resolved even if the paper and print quality settings are correct, there may beother causes. See also the sections below.Cannot Print to End of Job163
