Enables/disables automatic printing of a transmission report after sending.ATTACH TXIMAGE:If you select PRINT ERROR ONLY orPRNT FOR EACH TX as TX REPORT,enables/disables printing the first page of thefax under the report.DIAL TONE DETECTIf you selects ON, the machine transmits the fax after confirming the dial tone. This setting maynot be supported depending on the country or region of purchase.RX SETTINGSAUTO PRINT RXSets whether the machine automatically prints the received fax. When set to OFF, receivedfaxes are stored in memory.PRINT WHEN NOINK:If you select ON as AUTO PRINT RX,you can sets whether the machineautomatically prints the received fax when theink is low or has run out.Select OFF to store the received fax inmemory when the ink is low or has run out.Select ON to print the received faxregardless of the remaining ink level.ECM RXEnables/disables Error Correction Mode (ECM) during reception.FAX PRIORITY MODEIf you select FAX PRIORITY MODE as the receive mode, customizes its settings.RING STARTTIME:Selects the time the machine takes to checkwhether a call is a fax or voice call.TEL RING TIME: Selects the ring length for voice calls.DEFAULTACTION:Selects whether the machine switches to receivemode after the ring time has elapsed, or whetherit disconnects the call.142
