Problems Sending FaxesCannot Send a FaxCause ActionThe machine is notpowered on.You cannot send faxes if the power isturned off. Press the ON/OFF button to turnthe power on.After a power failure or disconnecting ofthe power cord, press the ON/OFF button toturn the power on.The In Use/Memory lamp isflashing.Another document is being sent from memory.Wait until the machine finishes sending it.The telephone line isconnected to theExternal Device Jack.Reconnect to the Telephone Line Jack. Refer toyour setup sheet.If you still cannot send a fax, there is a problemwith the telephone line. Contact your telephonecompany and the manufacturer of your terminaladapter or telephone adapter.The telephone linetype is not setcorrectly.If the telephone line type is not set correctly, youwill not be able to send faxes, but will still be ableto receive them. In this case, check thetelephone line type setting and change it asnecessary. See Setting the Telephone LineType.DIAL TONEDETECT is set toON.Resend the fax after a while. If you still cannotsend the fax, set DIAL TONE DETECT toOFF.The fax number is notcorrectly registered ina speed dial.Make sure that the fax number is correctlyregistered when speed dialing. See RegisteringCoded Speed Dialing.201
