Canon PIXM MX300 Series User Manual

Contents

Canon PIXM MX300 Series User Manual Manual pdf 25 page image

NoteAlign the edges of paper neatly before loading. Loading paper withoutaligning the edges may cause paper jams.If paper is curled, hold the opposing curled corners and gently bendthem in the opposite direction until the paper becomes completely flat.See Paper is curled..To avoid curling, handle paper as follows.- Put unused paper back into the package and keep them on a levelsurface.- Take out only the necessary number of sheets from the package,just before printing.2 Prepare to load paper.(1) Open the Rear Tray and pull out the Paper Support.Put your finger in the rounded indent of the Paper Support and pull it out until it stops.(2) Open the Paper Output Tray.Put your finger in the rounded indent beside the Paper Output Tray and open it gently.(3) Open the Output Tray Extension.Open up and set the Output Tray Extension completely by pressing down the hollow on itsfront side.(4) Adjust the position of the Paper Thickness Lever.Set it to the right when printing on envelopes or T-shirt transfers, and left when printing on25