Aligning Print Head on the MachineIf ruled lines are printed misaligned or print results are otherwise unsatisfactory, adjust the print headposition.1 Make sure that the machine is turned on, then load two sheets of A4 orLetter-sized plain paper in the Rear Tray.2 Open the Paper Output Tray, then set the Paper Thickness Lever.(1) Put your finger in the rounded indent beside the Paper Output Tray and open it gently.(2) Open up and set the Output Tray Extension completely by pressing down the hollowon its front side.(3) Set the Paper Thickness Lever to the left. See Paper Thickness Lever.3 Print the print head alignment pattern.(1) Press the Menu button repeatedly until MAINTENANCE appears.(2) Press the or button to select ALIGN PRINT HEAD, then press the OKbutton.The print head alignment pattern is printed.NoteIf you select HEAD ALIGN PRINT, the machine exits the processafter printing the current adjustment values.4 Adjust the print head position.(1) Check the printed patterns and press the or button to select the number of thepattern in column A that has the least noticeable streaks, then press the OK button.112
