Advanced Guide > About Network Communication > Changing and Confirming Network Settings > Changing the Settingsin the Admin Password SheetN017Changing the Settings in the Admin Password Sheet1. Start up the Canon IJ Network Tool.Starting up Canon IJ Network Tool2. Select the printer in Printers.3. Select Configuration from the Settings menu.4. Click the Admin Password tab.1. Use admin passwordSet a password for the administrator with privileges to set up and change detailed options. Touse this feature, select this check box and enter a password.ImportantThe password should consist of alphanumeric characters and be no longer than 32characters. The password is case-sensitive. Do not forget the password you set.2. PasswordEnter the password to set.3. Password ConfirmationEnter the password again for confirmation.5. Click OK.A dialog box is displayed asking you for confirmation before the settings are sent to the printer. If youclick Yes, the settings are sent to the printer and the Transmitted Settings dialog box is displayed.Page topPage 993 of 1037 pagesChanging the Settings in the Admin Password Sheet
