Advanced Guide > About Network Communication > Changing and Confirming Network Settings > Canon IJ Network ToolMenusN012Canon IJ Network Tool MenusThis section describes the menus in the Canon IJ Network Tool dialog box.1. File menuExitExits the Canon IJ Network Tool.2. View menuStatusDisplays the Status dialog box to confirm the printer connection status and wireless communicationstatus.RefreshUpdates and displays the contents of Printers to the latest information.ImportantTo change the printer's network settings using the Canon IJ Network Tool, it must beconnected via a LAN.If No Driver is displayed for the name, associate the port with the printer.If Not Found is displayed for the status, check the followings:The access point is turned on.When using wired LAN, the LAN cable is connected properly.If the printer on a network is not detected, make sure that the printer is turned on, then selectRefresh. It may take several minutes to detect printers. If the printer is not yet detected, connectthe machine and the computer with a USB cable, then select Refresh.If the printer is being used from another computer, a dialog box is displayed informing you ofthis condition.NoteThis item has the same function as Update in the Canon IJ Network Tool dialog box.Network InformationDisplays the Network Information dialog box to confirm the network settings of the printer and thecomputer.Display Warning AutomaticallyPage 983 of 1037 pagesCanon IJ Network Tool Menus
