Advanced Guide > About Bluetooth Communication > Bluetooth Settings > Bluetooth settings ScreenB014Bluetooth settings Screen1. Select device nameDisplays the device name of the printer to which the Bluetooth unit is attached.Select device name Screen2. Access refusal settingSelecting ON will disable searching of this printer by a Bluetooth-compatible device.Access refusal setting Screen3. Security settingsSelect Enable and then specify the security mode to activate the passkey set on the Changepasskey screen.Security settings Screen4. Change passkeyYou can change the passkey. The passkey refers to an identification number to be determined. It isused to prevent unwanted access from other Bluetooth devices. The initial value is set to 0000.Change passkey ScreenSelect device name ScreenAllows you to set the device name of the printer on a Bluetooth device.In the example used for this explanation, the model name is set to MG5200 series.When a model other than MG5200 series is used, whatever appears in place of "MG5200"becomes the model name use.Ex:When you select MG5200 series-2, the printer name displayed on the Bluetooth device is CanonMG5200 series-2.The initial value is set to MG5200 series-1.Page 818 of 1037 pagesBluetooth settings Screen
