Advanced Guide > Scanning > Scanning with Using the Operation Panel of the Machine > Forwarding Scanned Data tothe Computer Using the Operation Panel of the MachineU051Forwarding Scanned Data to the Computer Using the OperationPanel of the MachineYou can forward the scanned data to the computer using the Operation Panel of the machine.Before forwarding scanned data to the computer, confirm the following:The necessary application software (MP Drivers and MP Navigator EX)is installed.If the application software (MP Drivers and MP Navigator EX) is not yet installed, insert the Setup CD-ROM into the computer's disc drive, then perform Custom Install and select MP Drivers and MPNavigator EX to install.The machine is connected to a computer correctly.Make sure that the machine is connected to the computer correctly.Do not plug in or unplug the USB cable when scanning images with the machine, or when thecomputer is in the sleep or standby mode.If you perform scanning via a network connection, make sure that all the required settings have beenspecified. For details, refer to Network Scan Settings .The destination and the file name are specified in MP Navigator EX.You can specify the destination and the file name in MP Navigator EX. For details on how to performsettings or the initial settings, refer to Scanner Button Settings Tab (Save to PC) .1. Make sure that the machine is turned on.2. Select Scan on the HOME screen.NoteFor details on how to select a menu on the HOME screen, refer to Overview of the Machine.If you forward the data to the USB-connected computer:The Scan standby screen is displayed.Go to step 3.NoteIf the Save/Forward to screen is displayed, select PC and press the OK button. The ScanPage 478 of 1037 pagesForwarding Scanned Data to the Computer Using the Operation Panel of the...
