Advanced Guide > Scanning > Scanning with Using the Operation Panel of the Machine > Setting Items on the OperationPanel of the MachineU049Setting Items on the Operation Panel of the MachineYou can change the scan settings such as the scan size, resolution, or data format.When the Scan standby screen is displayed, press the right Function button to select the setting item.Use the to select the setting item, the button to specify the setting, then press the OK button.NoteWhen Auto scan is selected for Doc.type to forward the scanned data to the computer, the scansetting cannot be specified.Depending on the scan menu on the Save/Forward to screen, some setting items cannot beselected. This section describes the setting items when you select Memory card on the Save/Forward to screen.The setting item cannot be selected is displayed grayed out.Depending on the setting item, some settings cannot be specified in combination with the setting ofother setting item, the document type selected for Doc.type, or the scan menu on the Save/Forwardto screen. If the setting cannot be specified in combination is selected, Error details is displayed onthe LCD. In this case, press the left Function button to confirm the message, then change thesetting.The settings of the scan size, resolution, and data format are retained even if the machine is turnedoff.When scanning starts in the scan menu that is not available with the specified setting, Thespecified function is not available with current settings. is displayed on the LCD. Change thesetting, follow the on-screen instructions.When you forward the scanned data to the computer or attach the data to an e-mail, you can specifythe destination and file name using MP Navigator EX. Refer to Scanner Button Settings Tab (Save toPC) for the settings when forwarding the data to PC, and refer to Scanner Button Settings Tab(Attach to E-mail) for the settings when attaching the data to an e-mail.If you scan originals from the computer, you can scan with advanced settings. Refer to Let's TryScanning for scanning from the computer.1. Scan sizeSelect the size of the original on the Platen Glass.2. FormatSelect the data format of the scanned data.3. Scan res (Scan resolution)Select the resolution for scanning.4. PreviewSelect to preview the scanned data or not.Page 484 of 1037 pagesSetting Items on the Operation Panel of the Machine
