Advanced Guide > About Network Communication > Changing and Confirming Network Settings > Changing the Settingsin the Wired LAN Sheet (For MG6100 series/MG8100 series)N016Changing the Settings in the Wired LAN Sheet (For MG6100series/MG8100 series)NoteSelect Wired LAN active in the Change wireless/wired on the Operation Panel to change thesettings in the Wired LAN sheet.Changing the Machine Settings on the LCD1. Start up the Canon IJ Network Tool.Starting up Canon IJ Network Tool2. Select the printer in Printers.3. Select Configuration from the Settings menu.4. Click the Wired LAN tab.Click OK after changing configuration. A dialog box is displayed asking you for confirmation beforethe settings are sent to the printer. If you click Yes, the settings are sent to the printer and theTransmitted Settings dialog box is displayed.1. TCP/IP SetupSets the IP address of the printer to be used over the LAN. Set a value appropriate for yournetwork environment.Get IP address automaticallySelect this option to use an IP address automatically assigned by a DHCP server. DHCP serverfunctionality must be enabled on your wireless LAN router or access point.Use next IP addressIf no DHCP server functionality is available in your setup where you use the printer or you wantto use a particular IP address, select this option to use a fixed IP address.Page topPage 992 of 1037 pagesChanging the Settings in the Wired LAN Sheet (For MG6100 series/MG8100 ...
