Advanced Guide > Printing Using the Operation Panel of the Machine > Copying > Setting ItemsU032Setting ItemsWhen the Copy standby screen is displayed, press the right Function button to change the copy settingssuch as page size, media type, and print quality.Use the button to change the setting item, and the button to change the setting.NoteDepending on the copy menu, some setting items cannot be selected. This section describes thesetting items in Standard copy.The setting item cannot be selected is displayed grayed out.Depending on the setting item, some settings cannot be specified in combination with the setting ofother setting item or the copy menu. If the setting cannot be specified in combination is selected,Error details is displayed on the LCD. In this case, press the left Function button to confirm themessage, then change the setting.The settings of the page size, media type, etc. are retained even if the machine is turned off.When copying starts in the copy menu that is not available with the specified setting, The specifiedfunction is not available with current settings. is displayed on the LCD. Change the setting, followthe on-screen instructions.1. Magnif. (Magnification)Specify the reduction/enlargement method.Reducing or Enlarging a Copy2. IntensitySpecify the intensity. When Auto is selected, the intensity is adjusted automatically according to theoriginals loaded on the Platen Glass. Auto is displayed on the slide bar for the intensity on the Copystandby screen.ImportantWhen Auto is selected, pressing the button can change the intensity on the Copy standbyscreen. If you use the button to move the cursor on the center of the slide bar, autoPage 392 of 1037 pagesSetting Items
