Advanced Guide > About Bluetooth Communication > Printing Data via Bluetooth Communication > Setting the PrinterB008Setting the PrinterThis section describes the procedures for checking the settings of the Bluetooth unit on the LCD of theprinter in preparation for Bluetooth printing.If you need more information about the Bluetooth settings, see Setting Bluetooth Printing .1. Make sure that the Bluetooth unit is attached and the printer is turned on.For information about how to attach the Bluetooth unit, see Attaching to and Removing from thePrinter.2. Display the Bluetooth settings screen on the LCD.For information about how to display the Bluetooth settings screen, refer to Changing the MachineSettings on the LCD .NoteIf the Bluetooth settings screen is not displayed on the LCD, the Bluetooth unit may not beattached correctly. Remove the Bluetooth unit from the printer and attach it once again.For details, see Attaching to and Removing from the Printer .If the Bluetooth settings screen is not yet displayed, the Bluetooth unit may be faulty. In thiscase, contact the service center.3. Select Select device name.The Select device name screen is displayed.4. Check the device name.The device name is necessary to register the printer as a Bluetooth device. Be sure to note thedevice name.NotePage 803 of 1037 pagesSetting the Printer
