Advanced Guide > Troubleshooting > Problems with Scanning > Scan Quality (Image Displayed on the Monitor) Is PoorS905Scan Quality (Image Displayed on the Monitor) Is PoorCheck 1: Increase the scanning resolution.ResolutionCheck 2: Set the scale to 100%.Some applications do not display images clearly if the image is too small.Check 3: If moire (stripe pattern) appears, take the following measures andscan again.On the Basic Mode tab of ScanGear (scanner driver), select Magazine(Color) in Select Source.Basic Mode TabOn the Advanced Mode tab of ScanGear, set Descreen in Image Settings to ON.Image SettingsNoteIf moire appears when you scan a digital print photo, take the above measures and scan again.If you use MP Navigator EX, set Document Type to Magazine(Color) or enable Descreen in the ScanSettings dialog box and scan again.Scan Settings Dialog Box (Photos/Documents)Check 4: Check the monitor's color depth.Windows 7:From the Start menu, select Control Panel > Appearance and Personalization > Adjust screenresolution > Advanced settings.On the Monitor tab of the displayed dialog box, set Colors to High Color (16 bit) or True Color (32 bit).Windows Vista:From the Start menu, select Control Panel > Appearance and Personalization > Adjust screenresolution to open the Display Settings dialog box. Set the color depth to Medium (16 bit) or Highest(32 bit).Windows XP:From the Start menu, select Control Panel > Display to open the Display Properties dialog box. Onthe Settings tab, set Color quality to Medium (16 bit) or Highest (32 bit).Check 5: Clean the Platen and Document Cover.Cleaning the Platen Glass and Document CoverCheck 6: If the document is in poor condition (dirty, faded, etc.), useReduce Dust and Scratches, Fading Correction, Grain Correction, etc. inImage Settings on the Advanced Mode tab of ScanGear.Image SettingsCheck 7: If the color tone of images is different from the original document,take the following measures and scan again.On the Advanced Mode tab of ScanGear, set Image Adjustment in Image Settings to None.Image SettingsOn the Color Settings tab in the Preferences dialog box of ScanGear, set Color Matching.Page 921 of 1037 pagesScan Quality (Image Displayed on the Monitor) Is Poor
