Advanced Guide > Changing the Machine Settings > Changing the Machine Settings on the LCD > Print settingsU075Print settingsPrevent paper abrasionUse this setting only if the print surface becomes smudged.ImportantBe sure to set this back to OFF after printing since it may result in lower printing speed or lowerprint quality.Extended copy amountSelects the amount of image that extends off the paper when printing in borderless (full). Slightcropping may occur at the edges since the copied image is enlarged to fill the whole page. You canchange the width to be cropped from the borders of the original image as needed.Cropped area will be larger if Extended amount: Large is selected.ImportantThis setting can be applied under the following conditions:-When performing borderless copying-Borderless is selected for Border when printing from printed photosNoteIf printouts contain margins even though you are printing in Borderless, specifying Extendedamount: Large for this setting may help solve the problem.Auto photo fix settingWhen ON is selected, you can select whether to print photos using the Exif information recorded inthe image files in the following cases.Auto photo fix is selected for Photo fix when printing from a memory card/USB flash driveWhen printing with PictBridge compliant device that meets both the following conditions:-The print setting on the PictBridge compliant device is set to Default-Auto photo fix is selected for Photo fix in PictBridge print settingsPage topPage 834 of 1037 pagesPrint settings
