ImportantPart of the memory card will protrude from the Card Slot, but do not force it into the slot anyfurther. This can damage the machine or the memory card.Make sure that the memory card is correctly oriented before inserting it into the Card Slot. Ifyou force the memory card into the Card Slot in the wrong orientation, the memory card or themachine can be damaged.Do not insert more than one memory card at a time.4. Close the Card Slot Cover.Removing the Memory CardImportantIf you used the Card Slot as the memory card drive of a computer, you must perform the "saferemoval" operation on your computer before physically removing the memory card from themachine.If you are connecting the machine with a USB cable, right-click the removable disk icon and clickEject. If Eject does not appear on the screen, make sure that the Access lamp is lit, and thenremove the memory card.If you used the Card Slot via the LAN, you do not need to perform the "safe removal" operation onyour computer.1. Open the Card Slot Cover.2. Make sure that the Access lamp is lit, and remove the memory card.Hold the part of the memory card that is protruding and remove it straightforward from the machine.ImportantDo not remove the memory card while the Access lamp is flashing. The Access lamp flasheswhile the machine is reading or writing data from/to the memory card. If you remove thememory card or turn off the power while the Access lamp is flashing, the data saved on thememory card can be damaged.3. Close the Card Slot Cover.Page topPage 27 of 1037 pagesInserting the Memory Card
