Setting a Shared Folder as a Save Location2KUS-01SThe feature of scanning to shared folders is also called "Scan to SMB" because the feature uses Server Message Block(SMB), a Windows-specific technology. SMB is a protocol for sharing resources, such as files and printers, with morethan one device in a network ( Configuring SMB(P. 61) ). To configure the machine for saving your scanneddocuments into a shared folder in the network via SMB, specify the location of the shared folder from a computer inadvance. This section describes how to specify the save location by using the Send Function Setting Tool.● You can also use the Remote UI to specify the location of the shared folder as save destination by registeringthe folder to the Address Book. Registering Destinations in the Address Book from Remote UI.Registering Destinations from Remote UI(P. 346)1 Start the Send Function Setting Tool.Using a Web browserEnter "http:///sendsupport_login.html" in the address field of a Web browser,and press the [ENTER] key.Using the CD-ROM/DVD-ROM1 Insert the provided CD-ROM/DVD-ROM into the drive on the computer.● Select a language and click [OK] if you are prompted to do so.2 Click [Start Software Programs].● If the [Software Programs/Manuals Setup] screen is not displayed, see Displaying the [SoftwarePrograms/Manuals Setup] Screen(P. 558) .● If [AutoPlay] is displayed, click [Run MInst.exe].3 Click [Start] for [Send Function Setting Tool].4 Click [Next].● If you want to view "Send Setting Guide," click [How to Set].● If the screen that cancels the Windows firewall is displayed, click [Yes].5 Select the machine from [Device List] and click [Next].Setting Up86
