|
Scanning Documents from an Application2KUS-05AYou can scan originals from applications such as image-processing or word-processing software. The scanned image is directly loaded in the application,allowing you to edit or process the image immediately. The following procedurevaries depending on the application.● The application must be compatible with TWAIN or WIA*. For more information, see the instruction manualfor your application.*TWAIN is a standard for connecting image input devices, such as scanners, with computers. WIA is a function that is anintegrated standard in Windows.1 Place the original(s). Placing Originals(P. 128)● The second or subsequent originals may not be scanned, or an error message may be displayeddepending on the application. In such a case, place and scan one original at a time.● When is set to , you must press ( (COPY/SCAN)) to bring the machine online. (P. 424)2 From the application, select the start scan command.● The procedure for selecting the start scan command varies depending on the application. For moreinformation, see the instruction manual for your application.3 Select the scanner driver for this machine.● Select ScanGear MF or WIA. If you select ScanGear MF, you can configure advanced scan settings.4 Specify the scanning settings as necessary.5 Click [Scan].➠ Scanning of the original starts.● When scanning is complete, the scanned image is forwarded to an application.How to use ScanGear MF● Click on the ScanGear MF screen, and see the Help.Scanning261
|
