Configuring Basic E-Mail Settings2KUS-01KThis section describes how to configure the e-mail settings by using the Send Function Setting Tool. With the SendFunction Setting Tool, you can also register e-mail addresses to the Address Book.● The Send Function Setting Tool helps you configure the basic settings for sending e-mails. Instead of theSend Function Setting Tool, you can use the Remote UI to configure more detailed settings such as thesettings for POP authentication before sending or for encrypted communication. Configuring E-MailCommunication Settings(P. 82)1 Start the Send Function Setting Tool.Using a Web browserEnter "http:///sendsupport_login.html" in the address field of a Web browser,and press the [ENTER] key.Using the CD-ROM/DVD-ROM1 Insert the provided CD-ROM/DVD-ROM into the drive on the computer.● Select a language and click [OK] if you are prompted to do so.2 Click [Start Software Programs].● If the [Software Programs/Manuals Setup] screen is not displayed, see Displaying the [SoftwarePrograms/Manuals Setup] Screen(P. 558) .● If [AutoPlay] is displayed, click [Run MInst.exe].3 Click [Start] for [Send Function Setting Tool].4 Click [Next].● If you want to view "Send Setting Guide," click [How to Set].● If the screen that cancels the Windows firewall is displayed, click [Yes].5 Select the machine from [Device List] and click [Next].Setting Up79
