Connecting to a Wireless LAN2KUS-009Wireless routers (or access points) connect the machine to a computer via radio waves. If your wireless router isequipped with Wi-Fi Protected Setup (WPS), configuring your network is automatic and easy. If your networkingdevices do not support automatic configuration, or if you want to specify authentication and encryption settings indetail, you need to manually set up the connection. Make sure that your computer is correctly connected to thenetwork.Setting Up Connection Using WPS(P. 18)Manually Setting Up Connection(P. 19)Risk of information leak● Use wireless LAN connection at your own discretion and at your own risk. If the machine is connected to anunsecured network, your personal information might be leaked to a third party because radio waves used inwireless communication can go anywhere nearby, even beyond walls.Wireless LAN security● The wireless LAN function of this machine supports WEP, WPA-PSK, and WPA2-PSK. For the wireless securitycompatibility of your wireless router, see the instruction manuals for your networking devices or contactyour manufacturer.Required devices for wireless LAN connection● The machine does not come with a wireless router. Have the router ready as necessary.Setting Up Connection Using WPSWhen using WPS, two modes are available: push button mode and PIN code mode.◼ Push Button ModeFind the WPS mark shown below on the package of your wireless router. Also make sure that there is a WPS button onyour networking device. Setting Up Connection Using WPS Push Button Mode(P. 20)Setting Up18
