Procedure for Setting a Shared Folder as a SaveLocation2KUS-01RBefore configuring the machine for scanning to shared folders, check the setup flow shown below.Make sure that the machine and the computer are correctly connected.Connecting to a Wireless LAN(P. 18)Connecting to a Wired LAN(P. 17)Make sure that you have the following information:● The IP address of the machine. Viewing Network Settings(P. 38)● The name of the computer where the shared folder is located. Checking theComputer Name(P. 560)● Path to and the name of the shared folder (If access restrictions are set to thefolder, the user name and password information is also needed).● For instructions on how to create a new shared folder, see "Send Setting Guide"(included with the provided CD-ROM/DVD-ROM).Make sure that the computer meets the system requirements for the SendFunction Setting Tool.● System requirements for the Send Function Setting Tool SystemEnvironment(P. 546)● Also make sure that Disabling HTTP Communication(P. 331)Disabling Remote UI(P. 332)Set the machine configuration. Setting a Shared Folder as a SaveLocation(P. 86)Setting Up85
