Scanning and Saving to a Computer2KUS-04UThe sequence of "scanning an original and saving it to a computer" can only be done when scanning from themachine. Scan while specifying what computer originals will be saved to; whether to scan originals in color or blackand white; whether to save originals as PDFs or JPEGs; and other settings. Incidentally, if you want to specify acomputer connected to the network as the destination, you must register the machine with the computer in advance( Preparing to Use the Machine as a Scanner(P. 77) ).1 Place the original(s). Placing Originals(P. 128)2 Display the screen. Home Screen(P. 111)Touch Panel ModelSelect in the Home screen.5 Lines LCD ModelPress (COPY/SCAN).3 Select .● If only a computer connected to the machine via USB is used, proceed to step 5.4 Select the destination computer.5 Select the scan type.● The scan types and settings that are displayed can be confirmed and changed by using MF Scan Utility. Formore information, click [Instructions] on MF Scan Utility.● If you are a macOS user, see the manuals for the relevant drivers or software on the online manualwebsite.6 Press ( ).➠ Scanning of the original starts.● If you want to cancel, select . Canceling Sending Documents(P. 246)● You cannot scan while the ScanGear MF is displayed. Closethe screen before scanning.Scanning233
