Procedure for Setting to Send E-Mail2KUS-01JBefore configuring the machine for scanning to e-mail, check the setup flow shown below.Make sure that the machine and the computer are correctly connected.Connecting to a Wireless LAN(P. 18)Connecting to a Wired LAN(P. 17)Make sure that you have the following information:● The IP address of the machine. Viewing Network Settings(P. 38)● An e-mail address to be registered as a destination.● Information about the e-mail server, including the SMTP server name, portnumbers, whether authentication is required, and the user name and passwordfor authentication.● For more information about the e-mail server settings, contact your Internetservice provider or Network Administrator.Make sure that the computer meets the system requirements for the SendFunction Setting Tool (sending e-mail).● System requirements for the Send Function Setting Tool SystemEnvironment(P. 546)● Also make sure that Disabling HTTP Communication(P. 331)Disabling Remote UI(P. 332)Set the machine configuration.● Configuring Basic E-Mail Settings Configuring Basic E-Mail Settings(P. 79)● Configuring Detailed E-Mail Communication Settings (Authentication,Encryption, etc.) Configuring E-Mail Communication Settings(P. 82)Setting Up78
