➠ The selected destination and the fax settings used at the time are specified. You can also change thesettings before sending.To delete destinationsWhen you transmitted to multiple destinations, you can delete destinations as necessary.1 Select .2 Select a destination you want to delete.● If you specified Group Dial, "XX destination(s)" is displayed. Selecting displays destinations registered in the group.3 Select .6 Specify the scanning settings as necessary. Basic Operations for SendingFaxes(P. 195)7 Press .➠ Scanning of the original starts.● If you want to cancel, select . Canceling Sending Faxes(P. 202)When placing originals in the feeder in step 1When scanning is complete, the faxes are sent.When placing originals on the platen glass in step 1When scanning is complete, follow the procedure below.1 Select the original size.● When there is only one page to be scanned, proceed to step 3.2 Place the next original on the platen glass, and press .● Repeat this step until you finish scanning all of the pages.3 Select .➠ The faxes are sent.LINKSBasic Operations for Sending Faxes(P. 195)Faxing208
