3-9Paper RequirementsLoading and Outputting Paper3• If the paper storage room and work area differ from each other significantly intemperature or humidity, keep packed paper stack in the work area for at least one dayprior to printing so that it can adapt to the new environment. When paper is moved to alocation where the temperature or humidity differs significantly, the paper may curl orbecome creased.Storing PrintoutsWhen handling or storing printouts printed by this printer, be careful of the followingpoints:IMPORTANT• Avoid storing printouts with PVC materials such as clear folders. Otherwise toner maymelt and stick to the PVC material.• Use insoluble adhesive when gluing printouts. Toner may melt when soluble adhesive isused. Before using the adhesive, test it with paper that is no longer required.Make sure that the printed paper is completely dry before placing one over another.Toner may melt if they are placed together half-dried.• Store paper on a flat surface. Toner may peel when they are folded or creased.• Avoid storing printouts at high temperatures. Otherwise toner may melt and blot.• Put printouts in a binder when storing them for a long period of time (two years orlonger). (Printouts may discolor when they are stored for a long period of time.)
