4-4 Installing the CAPT SoftwareSetting Up the Printing Environment4Installing the CAPT SoftwareThis section describes the procedure for installing the CAPT software whenconnecting this printer to your computer with a USB cable.There are the following methods for installing the printer driver:*1 If you want to install the manuals only, see "Installing the Manuals," on p. 5-85.*2 When installing the CAPT software from [Add Printer Wizard], the USB port for connecting this printer has to havealready been registered.IMPORTANT• The CAPT software is required for printing with this printer. Be sure to install the CAPTsoftware.• When there is not enough free hard disk space, a message will appear during theinstallation. Stop the installation and increase the free space, and then install the CAPTsoftware again.NOTE• For details on the procedure for installing the software when installing the optionalnetwork board and connecting the printer to the computer with LAN, see "NetworkGuide".Installationmethod Contents Reference pageEasyInstallationInstalls the manuals when installing the printerdriver from the CD-ROM supplied with theprinter (CD-ROM Setup).p. 4-5CustomInstallationYou can choose to install only the printer driveror only the manuals from the CD-ROM suppliedwith the printer (CD-ROM Setup).*1p. 4-5Installing withPlug and PlaySearches for the printer automatically, selectsthe file required for the installation from theCD-ROM supplied with the printer, and theninstalls the printer driver.Windows XP/Server2003: p. 4-13Windows 2000: p. 4-18Windows 98/Me: p. 4-23Installing from[Add PrinterWizard]*2Using [Add Printer Wizard], selects the filerequired for the installation from the CD-ROMsupplied with the printer, and then installs theprinter driver.Windows XP/Server2003: p. 4-32Windows 2000: p. 4-39Windows 98/Me: p. 4-45
