3-21Loading Plain Paper, Heavy Paper, Transparencies, or Labels in the Paper SourceLoading and Outputting Paper3• When fanning or aligning the transparencies, try to hold the edges to avoidtouching the printing surface.• Take care not to mark or stain the printing surface of the transparencies withfingerprints, dust, or oil. This may result in poor print quality.4 Load the paper stack so that the rear edge is aligned with thepaper guide.CAUTIONWhen loading paper, take care not to cut your hands with the edges of thepaper.IMPORTANT• Be sure to check if the paper guide is at the position of the size of the loaded paper.If the paper guide is set at a wrong position, this may result in misfeeds.• If you use paper that has been poorly cut, multiple sheets of paper may be fed atonce. In this case, fan the paper thoroughly, and then align the edges of the stackon a hard, flat surface.
