Chapter 33-29F-3-1843.5.1.11 Removing the Read Roller 2 0011-37351) Remove the two screws [1], and then detach the cover [2].F-3-1852) Remove the resin ring [1], gear [2], and bearing [3].F-3-1863) Remove the resin ring [1], belt [2], gear [3], and bearing [4], and thenremove the read roller 2 [5].When installing the read roller 2, loosen the screws [6] and attach thebelt.F-3-1873.5.1.12 Removing the Sensor in the Feeder Unit 0010-42131) Remove the two screws [1], and then remove the sensor unit [2].F-3-1882) Remove the sensor [1] from the sensor unit.F-3-1893.5.2 Document Width Volume3.5.2.1 Removing the Relay PCB (Document WidthSensor PCB) 0010-65861) Remove the three screws [1] on the reverse side of the document tray us-ing the stubby driver, and then detach the cover [2].F-3-190[4] [3] [1][2][5][1][2][1][2][3][1] [3] [4] [6][2] [5][1][2][1][1][2]
