Canon DADF-P1 Service Manual

Also see for DADF-P1: Portable manual

Contents

Canon DADF-P1 Service Manual Manual pdf 51 page image

Chapter 33-11F-3-665) Remove the resin ring [1], and then remove the bearing [2] and lower reg-istration roller [3].F-3-673.4.6 Delivery Reversing Roller (upper)3.4.6.1 Removing the Front Cover 0010-66061) Open the feeder cover [1], and then remove the screw [2].F-3-682) Remove the two screws [3], and then detach the front cover [4].F-3-693.4.6.2 Removing the Feeder Cover 0010-66181) Remove the screw [1] and positioning pin [2], and then detach the feedercover [3].F-3-703.4.6.3 Removing the Rear Cover 0010-66211) Open the feeder cover.2) Move to the back of the machine, remove the two screws [1], and thendetach the rear cover [2].F-3-71Remove the rear cover with the two claws [3] released.3.4.6.4 Removing the ADF Driver PCB 0011-32321) Disconnect all connectors from the ADF driver PCB. (10 connectors)2) Remove the two screws [1], and then remove the ADF driver PCB [2].F-3-723.4.6.5 Removing the Pickup Motor 0010-66351) Disconnect the connector [1], and then remove the tension spring [2].2) Remove the two screws [3], and then remove the pickup motor [4]together with the adjusting plate.[1][2][3][5][6][4][1] [2] [3][1][2][3][4][3][2][1][1][3][2][2][1]