Chapter 33-7F-3-382) Remove the pickup roller [1].3) Remove the E-ring [2], and then remove the separation roller [3].F-3-393.4.3 Separation Plate/Separation Pad3.4.3.1 Removing the Separation Pad 0010-39891) Open the feeder cover.2) Release the two hooks [1], and then remove the separation pad [2].F-3-403.4.4 Upper Registration Roller3.4.4.1 Removing the Front Cover 0010-63591) Open the feeder cover [1], and then remove the screw [2].F-3-412) Remove the two screws [3], and then detach the front cover [4].F-3-423.4.4.2 Removing the Feeder Cover 0010-63601) Remove the screw [1] and positioning pin [2], and then detach the feedercover [3].F-3-433.4.4.3 Removing the Upper Registration Roller 0010-39931) Release the two hooks [1], and then detach the inner cover [2] of the feedercover.F-3-442) Slide the shaft [1] in the direction of the arrow, and then remove the upperregistration roller [2].Do not remove the upper registration roller shaft holder [3] because itwas factory-adjusted.[2] [1][2][1][3][2][1][1][2][3][4][3][2][1][1] [2] [1]
