Canon DADF-P1 Service Manual

Also see for DADF-P1: Portable manual

Contents

Canon DADF-P1 Service Manual Manual pdf 56 page image

Chapter 33-16F-3-994) Remove the two screws [1], two springs [2], the member [3], and themember [4] and then remove the read roller 1 [5].F-3-100MEMO:When the read roller 2 is removed first, it works easily [the installation of theread roller 1].3.4.8 Read Roller 23.4.8.1 Removing the Front Cover 0010-66081) Open the feeder cover [1], and then remove the screw [2].F-3-1012) Remove the two screws [3], and then detach the front cover [4].F-3-1023.4.8.2 Removing the Feeder Cover 0010-66161) Remove the screw [1] and positioning pin [2], and then detach the feedercover [3].F-3-1033.4.8.3 Removing the Rear Cover 0010-66231) Open the feeder cover.2) Move to the back of the machine, remove the two screws [1], and thendetach the rear cover [2].F-3-104Remove the rear cover with the two claws [3] released.3.4.8.4 Removing the ADF Driver PCB 0011-32351) Disconnect all connectors from the ADF driver PCB. (10 connectors)2) Remove the two screws [1], and then remove the ADF driver PCB [2].F-3-1053.4.8.5 Removing the Pickup Motor 0010-66371) Disconnect the connector [1], and then remove the tension spring [2].2) Remove the two screws [3], and then remove the pickup motor [4]together with the adjusting plate.[4] [3] [1][2][4][3][5][1][2][2][1][2][3][4][3][2][1][1][3][2][2][1]