Canon DADF-P1 Service Manual

Also see for DADF-P1: Portable manual

Contents

Canon DADF-P1 Service Manual Manual pdf 67 page image

Chapter 33-27F-3-1713.5.1.3 Removing the Rear Cover 0010-66261) Open the feeder cover.2) Move to the back of the machine, remove the two screws [1], and thendetach the rear cover [2].F-3-172Remove the rear cover with the two claws [3] released.3.5.1.4 Removing the ADF Driver PCB 0011-32391) Disconnect all connectors from the ADF driver PCB. (10 connectors)2) Remove the two screws [1], and then remove the ADF driver PCB [2].F-3-1733.5.1.5 Removing the Pickup Motor 0010-66401) Disconnect the connector [1], and then remove the tension spring [2].2) Remove the two screws [3], and then remove the pickup motor [4]together with the adjusting plate.F-3-1743.5.1.6 Removing the Feed Motor 0010-66481) Disconnect the connector [1], and then remove the tension spring [2].2) Remove the two screws [3], and then remove the feed motor [4] togetherwith the adjusting plate.F-3-1753.5.1.7 Removing the Timing Belt 0010-66551) Remove the screw [1], and then disconnect the ground cable [2].F-3-1762) Disconnect the two sensor connectors [1].3) Remove the harness from the harness guide [2].4) Remove the screw [3], and remove the harness guide [2].5) Remove the two screws [4], and then remove the metal plate [5].6) Remove the four screws [6], and then remove the left hinge [7].[3][2][1][1][3][2][2][1][3][4][1] [3][2][1][4][2][3][2][1]