Chapter 33-22F-3-1393.4.10.5 Removing the Pickup Motor 0010-66391) Disconnect the connector [1], and then remove the tension spring [2].2) Remove the two screws [3], and then remove the pickup motor [4]together with the adjusting plate.F-3-1403.4.10.6 Removing the Feed Motor 0010-66471) Disconnect the connector [1], and then remove the tension spring [2].2) Remove the two screws [3], and then remove the feed motor [4] togetherwith the adjusting plate.F-3-1413.4.10.7 Removing the Timing Belt 0010-66541) Remove the screw [1], and then disconnect the ground cable [2].F-3-1422) Disconnect the two sensor connectors [1].3) Remove the harness from the harness guide [2].4) Remove the screw [3], and remove the harness guide [2].5) Remove the two screws [4], and then remove the metal plate [5].6) Remove the four screws [6], and then remove the left hinge [7].F-3-1437) Remove the four screws [1], and then remove the metal plate.F-3-1448) Remove the timing belt [1].[2][1][3][4][1] [3][2][1][4][2][3][2][1][6][7][4] [5][3][1][2][6][1][1][1]
