Chapter 33-18F-3-1123.4.8.9 Removing the Feeding Unit 0010-66661) Remove the two screws [1].F-3-1132) Remove the two screws [1], and then remove the feeding unit.F-3-1143.4.8.10 Removing the Read Roller 2 0010-40401) Remove the two screws [1], and then detach the cover [2].F-3-1152) Remove the resin ring [1], gear [2], and bearing [3].F-3-1163) Remove the resin ring [1], belt [2], gear [3], and bearing [4], and thenremove the read roller 2 [5].When installing the read roller 2, loosen the screws [6] and attach thebelt.F-3-1173.4.9 Platen Roller3.4.9.1 Removing the Front Cover 0010-66091) Open the feeder cover [1], and then remove the screw [2].F-3-1182) Remove the two screws [3], and then detach the front cover [4].[1] [2][3][1][1][2][1][2][1][2][3][1] [3] [4] [6][2] [5][1][2]
