Canon DADF-P1 Service Manual

Also see for DADF-P1: Portable manual

Contents

Canon DADF-P1 Service Manual Manual pdf 42 page image

Chapter 33-2F-3-72) Remove the two screws [3], and then detach the front cover [4].F-3-83.2.3.2 Removing the Feeder Cover 0010-39251) Remove the screw [1] and positioning pin [2], and then detach the feedercover [3].F-3-93.3 Drive System3.3.1 Pickup Motor3.3.1.1 Removing the Rear Cover 0010-61901) Open the feeder cover.2) Move to the back of the machine, remove the two screws [1], and thendetach the rear cover [2].F-3-10Remove the rear cover with the two claws [3] released.3.3.1.2 Removing the Pickup Motor 0010-39271) Disconnect the connector [1], and then remove the tension spring [2].2) Remove the two screws [3], and then remove the pickup motor [4]together with the adjusting plate.F-3-113.3.1.3 Installing the Pickup Motor 0010-39281) Attach the tension spring [1] to the adjusting plate and motor base, andthen install the motor in such a manner that the motor pulley and thetiming belt are engaged.2) Install the pickup motor [3] together with the adjusting plate using twoscrews [2].3) Connect the connector [4].[1][2][3][4][3][2][1][1][3][2][3][4][1] [3][2]