Chapter 33-12F-3-733.4.6.6 Removing the Feed Motor 0010-66431) Disconnect the connector [1], and then remove the tension spring [2].2) Remove the two screws [3], and then remove the feed motor [4] togetherwith the adjusting plate.F-3-743.4.6.7 Removing the Timing Belt 0010-66501) Remove the screw [1], and then disconnect the ground cable [2].F-3-752) Disconnect the two sensor connectors [1].3) Remove the harness from the harness guide [2].4) Remove the screw [3], and remove the harness guide [2].5) Remove the two screws [4], and then remove the metal plate [5].6) Remove the four screws [6], and then remove the left hinge [7].F-3-767) Remove the four screws [1], and then remove the metal plate.F-3-778) Remove the timing belt [1].F-3-783.4.6.8 Removing the Document Tray 0010-66571) Remove the screw [1] at the front of the machine, and then remove the trayholder [2].2) Remove the document tray [3].[3][4][1] [3][2][1][4][2][3][2][1][6][7][4] [5][3][1][2][6][1][1][1][1]
