Canon DADF-P1 Service Manual

Also see for DADF-P1: Portable manual

Contents

Canon DADF-P1 Service Manual Manual pdf 64 page image

Chapter 33-242) Move to the back of the machine, remove the two screws [1], and thendetach the rear cover [2].F-3-153Remove the rear cover with the two claws [3] released.3.4.11.4 Removing the ADF Driver PCB 0011-32381) Disconnect all connectors from the ADF driver PCB. (10 connectors)2) Remove the two screws [1], and then remove the ADF driver PCB [2].F-3-1543.4.11.5 Removing the Pickup Motor 0010-65921) Disconnect the connector [1], and then remove the tension spring [2].2) Remove the two screws [3], and then remove the pickup motor [4]together with the adjusting plate.F-3-1553.4.11.6 Removing the Feed Motor 0010-65931) Disconnect the connector [1], and then remove the tension spring [2].2) Remove the two screws [3], and then remove the feed motor [4] togetherwith the adjusting plate.F-3-1563.4.11.7 Removing the Timing Belt 0010-65941) Remove the screw [1], and then disconnect the ground cable [2].F-3-1572) Disconnect the two sensor connectors [1].3) Remove the harness from the harness guide [2].4) Remove the screw [3], and remove the harness guide [2].5) Remove the two screws [4], and then remove the metal plate [5].6) Remove the four screws [6], and then remove the left hinge [7].[1][3][2][2][1][3][4][1] [3][2][1][4][2][3][2][1]