Canon DADF-P1 Service Manual

Also see for DADF-P1: Portable manual

Contents

Canon DADF-P1 Service Manual Manual pdf 43 page image

Chapter 33-3F-3-123.3.2 Feed Motor3.3.2.1 Removing the Rear Cover 0010-61911) Open the feeder cover.2) Move to the back of the machine, remove the two screws [1], and thendetach the rear cover [2].F-3-13Remove the rear cover with the two claws [3] released.3.3.2.2 Removing the Feed Motor 0010-39301) Disconnect the connector [1], and then remove the tension spring [2].2) Remove the two screws [3], and then remove the feed motor [4] togetherwith the adjusting plate.F-3-143.3.2.3 Installing the Feed Motor 0010-39311) Install the feed motor in such a manner that the motor pulley is engagedwith the timing belt, and then tighten two screws [1] temporarily.2) Attach the tension spring [2] to the adjusting plate and motor base, andthen securely tighten the screws tightened temporarily in step 1.3) Connect the connector [3].F-3-153.3.3 Timing Belt/Pulley3.3.3.1 Removing the Front Cover 0010-61951) Open the feeder cover [1], and then remove the screw [2].F-3-162) Remove the two screws [3], and then detach the front cover [4].F-3-173.3.3.2 Removing the Feeder Cover 0010-61941) Remove the screw [1] and positioning pin [2], and then detach the feedercover [3].[2][3][4] [2][1][1][3][2][1][4][2][3][3][2][1][1][2][3][4]