COPYRIGHT © 1999 CANON INC. CANON 660/2100 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)C. Development BlockIn this block, toner is deposited on the latent static image on the surface of the pho-tosensitive drum, thereby turning it into a visible image. The machine’s black toner is amagnetic, single-component toner, and its color toner is non-magnetic, single-componenttoner; the printer unit uses the toner projection method of development.Step 4 (development)As previously mentioned, the machine’s black toner is a magnetic, signal-componenttoner consisting of magnetite and resin. Its color toner, on other hand, is a non-magnet-ic single-component toner composed of resin. These toners have insulating characteris-tics, and are negatively charged by friction against the surface of a rotating cylinder andthe surface of a blade.The color toner may be yellow, magenta, or cyan, and is in a specific toner cartridge.The color toner cartridge is housed in a developing rotary, and the rotation of the rotarypositions each cartridge against the photosensitive drum.The black toner cartridge is mounted outside the developing rotary, and is positionedagainst the photosensitive drum at all times.When an area of the photosensitive drum exposed to a laser beam approaches atoner layer (charged to negative potential), the difference in potential between the surfaceof the drum and the developing cylinder (higher on the drum side) causes the toner tojump and adhere the surface of the drum. This is called “jumping development,” and turnsthe latent static image on the surface of the photosensitive drum into a visible image.The developing cylinder is given an AC bias to facilitate movement of toner to the sur-face of the photosensitive drum and to improve contact on output images. The DC biasapplied to the developing cylinder is varied in reference to the result of image density cor-rection control (p. 4-21) executed on the DC controller PCB.CHAPTER 1 GENERAL DESCRIPTION1-25Download free service manual at http://printer1.blogspot.com
