COPYRIGHT © 1999 CANON INC. CANON 660/2100 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)11)Remove the three screws, and disen-gage the two claws; then, disconnectthe connector, and detach the multi-feeder pick-up assembly.q Screws w Connectore Clawsr Multifeeder pick-up assemblyFigure 5-625F. Multifeeder Tray Pick-UpRoller1. Removing the Multifeeder TrayPick-Up Roller1) Open the right cover.2) While pushing the holding plate andthe separation pads, pull out the mul-tifeeder pick-up roller by holding theknob on the roller.q Holding platew Multifeeder separation pade Multifeeder pick-up rollerFigure 5-626CHAPTER 5 PICK-UP/FEEDING SYSTEM5-44qrewqweDownload free service manual at http://printer1.blogspot.com
