COPYRIGHT © 1999 CANON INC. CANON 660/2100 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)CHAPTER 4 IMAGE FORMATION SYSTEM4-51• Enlarged View of the Right Endq Sprint w StayFigure 4-8385) Free the claw of the releasing knobfound on the left end of the ITD clean-ing holder assembly, turn the releas-ing knob in the direction of the arrow;then, match the boss of the releasingknob as shown.Figure 4-8396) As in step 5), match the releasingknob found on the right end of the ITDcleaning holder assembly.7) Pull out both ends of the ITD cleaningholder assembly to take out the ITDcleaning holder assembly horizontally.q ITD cleaning holder assemblyFigure 4-8408. Removing the ITD Cleaning Roller1) Take out the ITD cleaning roller.2) Pull out the roller roll to the front, andslide it to the right; then, detach theITD cleaning roller.q Roller rollw ITD cleaning roller solenoidFigure 4-841qwqqwClaw Releasing knobClawReleasing knobPoint of RemovalDownload free service manual at http://printer1.blogspot.com
