NoteIf you scan without preview, colors are adjusted based on the document type selected in SelectSource.When using the machine for the first time, scanner calibration starts automatically. Wait a whileuntil the preview image appears.DestinationSelect what you want to do with the scanned image.Print (300 dpi)Select this to print the scanned image on a printer.Image display (150 dpi)Select this to view the scanned image on a monitor.OCR (300 dpi)Select this to use the scanned image with OCR software.OCR software is software that converts text scanned as an image into text data that can beedited in word processors and other programs.NoteTo scan at 301 dpi or higher, scan in Advanced Mode after setting the Output Resolution.See "Scanning in Advanced Mode " to scan in Advanced Mode.Output SizeSelect an output size.Output size options vary by the item selected in Destination.FlexibleWhen a cropping frame is displayed, the portion within the cropping frame will be scanned at100%. When no cropping frame is displayed, the entire Preview area will be scanned.Paper Size (L, A4, etc.)Select an output paper size. The portion within the cropping frame will be scanned at the size ofthe selected paper size. You can drag the cropping frame to enlarge/reduce it while maintainingthe aspect ratio.Monitor Size (1024 x 768 pixels, etc.)Select an output size in pixels.A cropping frame of the selected monitor size will be displayed and the portion within thecropping frame will be scanned. You can drag the cropping frame to enlarge/reduce it whilemaintaining the aspect ratio.Add/Delete...Open the Add/Delete the Output Size dialog box, in which you can save custom output sizes. Youcan select this option when Destination is Print (300 dpi) or Image display (150 dpi).Page 542 of 815 pagesBasic Mode Tab
