NoteIf you scan without preview, colors are adjusted based on the document type selected in SelectSource.4. Set Destination.NoteTo scan at 301 dpi or higher, scan in Advanced Mode tab.Scanning in Advanced Mode5. Set Output Size.Output size options vary by the items selected in Select Source and Destination.6. Adjust the scan area (cropping frame) as required.Adjust the size and position of the scan area (cropping frame) on the preview image. You can alsocreate two or more cropping frames.If an area is not specified, the document will be scanned at the document size (Auto Crop). If an areais specified, only the portion in the specified area will be scanned.Adjusting Cropping Frames7. Set Image corrections as required.8. Click Scan.Scanning starts.NoteScanGear's response after scanning can be specified in Status of ScanGear dialog afterscanning on the Scan tab of the Preferences dialog box.Scan TabNoteSee " Basic Mode Tab " for details on the Basic Mode tab.Page topPage 517 of 815 pagesScanning in Basic Mode
