hard on the Document Cover. The Platen Glass may break andcause injury.Print Headsand ink tanksKeep ink tanks out of the reach of children.In case ink is accidentally licked or swallowed, rinse out mouth or giveone or two glasses of water to drink.If irritation or discomfort occurs, obtain medical advice immediately.In case ink gets in contact with eyes, rinse with waterimmediately.In case ink gets in contact with skin, wash with soap andwater immediately.If irritation to eyes or skin persists, obtain medical advice immediately.Do not shake Print Heads or ink tanks.Ink may leak out and stain clothing or the surrounding area.Never touch the electrical contactson a Print Head after printing.The metal parts may be very hot andcould cause burns.Do not throw ink tanks into fire.Do not attempt to disassemble or modify the Print Head andink tanks.Do not handle the Print Head and ink tanks roughly such asapplying them excessive pressure or dropping them.Do not rinse or wipe the Print Headand ink tanks.Once you have installed the Print Head and ink tanks, do notremove them unnecessarily.Radio waveinterferenceSince the microwave oven and the wireless LAN system usethe same frequency bandwidth, the microwave oven can bethe potential source of interference when the microwaveoven is on.Placing this product close to microwave oven mayresult in the poor status of radio.Note when you place the machine near other electrical appliances such as fluorescent lampsPlace the machine at least 5.91 inches / 15 cm away from other electrical appliances such asfluorescent lamps. If the machine is placed closer to those, it may not be able to work properly dueto fluorescent noises.When you turn off the powerWhen you turn off the power, always press the ON button and be sure that the Power lamp (ingreen) has gone out. If you disconnect the power plug from the power outlet when the Power lamplights or flashes, the Print Head cannot be protected and you may not be able to print later.Page topPage 106 of 815 pagesSafety Precautions
