Black plate (15,1)Cadillac ATS (Europe) - 2013 - crc - 10/8/12In Brief 1-15J : Press to turn the system onand off. A white cruise controlindicator appears in the instrumentcluster when cruise is turned on.+RES: Press the control up brieflyto resume to a previously set speedor to increase vehicle speed if thecruise control is already activated.To increase speed by 1 km/h(1 mph), press +RES up to the firstdetent. To increase speed to thenext 5 km/h (5 mph) mark on thespeedometer, press +RES up to thesecond detent.SET−: Press the control downbriefly to set the speed and activatecruise control or to decrease vehiclespeed if the cruise control is alreadyactivated. To decrease speed by1 km/h (1 mph), press SET− downto the first detent. To decreasespeed to the next 5 km/h (5 mph)mark on the speedometer, pressSET− down to the second detent.* : Press to disengage cruisecontrol without erasing the setspeed from memory.See Cruise Control on page 9‑35 orAdaptive Cruise Control onpage 9‑38 (if equipped).Infotainment SystemSee the infotainment manual forinformation on the radio, audioplayers, phone, navigation system,and voice or speech recognition.It also includes information onsettings and downloadableapplications (if equipped).Driver InformationCenter (DIC)The DIC display is in the instrumentcluster. It shows the status of manyvehicle systems.y or z : Press to move up ordown in a list.S or T : Press to move betweenthe interactive display zones in thecluster. Press S to go back to theprevious menu.SEL: Press to open a menu orselect a menu item. Press and holdto reset values on certain screens.See Driver Information Centre (DIC)on page 5‑23.
