Programmable ModesMode 1: ONMode 2: OFFBefore your vehicle was shipped from the factory, it wasprogrammed to Mode 1. The mode to which thevehicle was programmed may have been changed sinceit left the factory. To determine the mode to which thevehicle is programmed or to program the vehicle toa different mode, do the following:1. Enter FEATURE PROGRAMMING following theinstructions listed previously.2. Press the down arrow on the INFO button untilDOORS LOCK IN GEAR appears on the DICdisplay.3. To turn on the feature, press the ON/OFF buttonuntil ON appears on the DIC display. To turn it off,press the ON/OFF button until OFF appears onthe display.The mode you selected is now set. You can either exitthe programming mode by following the instructionslater in this section or program the next feature availableon your vehicle.Driver Unlock in PARK (P)This feature allows the driver’s door to automaticallyunlock when the vehicle is shifted into PARK (P).All other doors will remain locked until the unlock buttonon either front door armrest or on the remote keylessentry transmitter is pressed.Programmable ModesMode 1: ONMode 2: OFFBefore your vehicle was shipped from the factory, it wasprogrammed to Mode 2. The mode to which thevehicle was programmed may have been changed sinceit left the factory. To determine the mode to which thevehicle is programmed or to program the vehicle toa different mode, do the following:1. Enter FEATURE PROGRAMMING following theinstructions listed previously.2. Press the down arrow on the INFO button untilDRIVER UNLOCK IN PARK appears on the DICdisplay.3. To turn on the feature, press the ON/OFF buttonuntil ON appears on the DIC display. To turn it off,press the ON/OFF button until OFF appears onthe display.3-76
