VISTA-32FB/VISTA-128FB Installation and Setup Guide6-12PROMPT EXPLANATIONMON A1 Window 2 ?00:00 00:00 00Enter the second time-window number from 01-20 for this access schedule for the displayed day. As thenumber is keyed in, the actual time that has been stored for the window is displayed.Press [✳] to continue.TUE A1 Window 1?00:00 00:00 00Repeat the procedure for the other days of the week. When the last day of the week has been programmed,the windows for holidays may be entered.Hol A1 Window 1 ?00:00 00:00 00Enter the first time-window number for holidays for this access schedule. As the number is keyed in, theactual time that has been stored for the window is displayed.Press [✳] to continue.Hol A1 Window 2 ?00:00 00:00 00Enter the second time-window number for holidays for this access schedule. As the number is keyed in, theactual time that has been stored for the window is displayed.Press [✳] to continue.Quit ?1 = YES 0 = NO 0Enter 0 at the “Quit ?” prompt to return to the main menu choices and continue programming.Enter 1 to quit Scheduling Menu Mode.Temporary SchedulesEach partition can be assigned a temporary schedule,which overrides the regular open/close schedule (andthe holiday schedule). This schedule takes effect assoon as it is programmed, and remains active for up toone week.Only users with the authority level of manager orhigher can program temporary schedules.A temporary schedule affects only the partition fromwhich it is entered. Temporary schedules can also bereused at later dates simply by scrolling (pressing [#])to the “DAYS?” prompt and activating the appropriatedays. This should be considered when defining dailytime windows.Temporary Schedule WorksheetPartition/Windows Mon Tue Wed Thu Fri Sat Sun1 Disarm WindowStart Time HH:MMStop Time HH:MMArm WindowStart Time HH:MMStop Time HH:MM2…8 Disarm WindowStart Time HH:MMStop Time HH:MMArm WindowStart Time HH:MMStop Time HH:MM
