DocuMate 252 Scanner User’s Guide 63ScanningConfiguring Before ScanningChoosing Configure Before Scan simply opens a scanninginterface when you press or click a scan button. You can then usethe interface to change the Resolution, Scan Mode, and othersettings. When you scan, the scanned image will still be sent asthe file type and to the same Destination Application alreadyselected in the OneTouch Properties window for that button.To configure before scanning:1. Open the One Touch Properties window.2. Using the arrows, choose the button that you want to set toconfigure before scanning.3. Select the scan configuration Configure Before Scan.4. Right-click on Configure Before Scan and choose an interfaceto use for configuring before scanning.TWAIN—The TWAIN Interface opens for you to make changesprior to scanning. See “Accessing the TWAIN Interface fromPaperPort” on page 86.ISIS—The ISIS Scan interface opens for you to make changesprior to scanning.See “Scanning with the ISIS Interface” onpage 104.WIA—The Windows Image Acquisition Interface (WIA) opensfor you to make changes prior to scanning (available forWindows XP only). See “Scanning with the WIA Interface” onpage 99.5. Click OK or Apply on the One Touch Properties window.Click the arrows toselect the button.Select ConfigureBefore Scan.Right-click onConfigure Before Scanto get the menu, andchoose the interface touse for configuring.
